FOR LYNX OR LYRIC SYSTEMS:
To Arm:
In security settings, touch Arm Away Mode then enter your four (4) digit code. This arms the entire system.
In security settings, touch Arm Stay Mode then enter your four (4) digit code. This arms only the perimeter of the residence or building.

To Disarm:
In security settings, touch disarm system and enter four (4) digit code.
To Reset After An Alarm: Disarm the system then enter your four (4) digit code twice.

Signal Explanation PDF>
FOR KEYPAD SYSTEMS:
To Arm:
Enter your four (4) digit code and press the number 2, 3, or 7:
#2 If you are leaving the House (Everything is on)
#3 If you are staying in the House (No Motion Detectors)
#7 If you are staying in the House (No Motion Detectors or Delay on Doors)
To Turn Off Your System: Enter your four (4) digit code then press the number 1. To Reset Your System After An Alarm: Enter your four (4) digit code then press the number 1. THIS MUST BE DONE TWICE. To Bypass A Zone: Enter your four (4) digit code then press 6, then enter the two digit zone number. To Find Faulted Zone: Press the * button. The Faulted Zone will be displayed. To Turn On The Chime Mode: Enter your four (4) digit code then the number 9. To Turn Off The Chime Mode: Enter your four (4) digit code then the number 9. Signal Explanation PDF>

The way to reset your alarm system after an alarm activation varies based on the type of system you have. If you have a Magnum Alert, Napco, or Gemini system, hold down the #9 until it beeps. If you have a First Alert system, enter your 4-digit code and 1. To reset it after a fire alarm, enter the 4-digit code and the number (1) 3 times in a row.

All project are completed in a time manner.